MIG Welder 145A Mig/Stick/Lift tig Multiprocess Welder 220V Flux Core Welder USA
MIG Welder 145A Mig/Stick/Lift tig Multiprocess Welder 220V Flux Core Welder USA. Reboot 4 in 1 welder. RBM1450 has four modes: MIG Gas, Flux core, Stick, Lift tig. This machine all adopts the "one-key selection" design, which can easily switch between different modes. It is very simple for users to use it out of the box. Power light:When this light is on, it means the power supply is normal. Protection light: When an abnormal occurs, the indicator lights up, the abnormal is eliminated, and the indicator lights out. Adjusting knob:It is used to adjust the voltage and current, and the one-button smart button controls the voltage and current wire feeding speed at the same time, stabilizes the arc, and is easy to operate.
In MIG mode, gears 1-10, the higher the gear, the faster the wire feeding speed. Mode switch:Select Mig/Stick/Lift tig.
Wire diameter selection:Welding supports MIG's 0.023'', 0.030'', 0.035'', 0.040'' solid and flux cored wires. This machine is equipped with 0.30''/0.40'' wire feed shaft, if you need to use other wire diameters, you need to prepare it yourself.
Power supply (V): 220V ± 15%. Output current range (A): 20 - 145. Output voltage range (V): 20.8 - 25.8. Size: 10.3 x 6.1 x 8.7 inches.
The welder is equipped with a unique digital electronic reactor circuit. The welding process of short circuit transition and mixed transition can be controlled very precisely.