Thanks to digital control, the machine comes with synergy effect software that matches the wire diameter, material and current. It is an excellent choice for new welders and is easier for welding professionals. Additional voltage and inductance settings for professionals to find the exact welding performance of various projects. Current display: shows preset current and actual welding current.MIG Welding Torch Switch (Only effective for MIG 0.8 / MAG 0.8 / FLUX 1.0): The welder can only be operated by the spool gun torch in spool gun torch mode. MIG torch is only used for welding in MIG torch mode. Please check the status of the switch when using it. This light will light up in stick mode. This light will light up in LIFTTIG mode. Voltage Minor Adjustment FunctionIf the output current does not change, the output voltage can be adjusted from -3V to +3V.
Different individual habits and work can improve the welding effect. Current adjustment functionOnly the current is adjusted, but this unit is a digital device.
Parameters of current, voltage, and wire supply speed are matched. After adjusting the current, other parameters follow the conversion and matching. OC Lights: If the welding load is overload and the output current of the machine is too big, the internal temperature of the machine is too high and the mechanical failure lamp will light up. Machine can be recovered after heat dissipation is normal.Please restart the power supply. AC 110V: When the input voltage is 110V. AC 220V: This light will light up when the input voltage is 220V. MIG Welding Mode Shift Button: MIG 0.8, MAG 0.8, FLUX1.0. Holding and placement of torch.
Hold the torch so that the wire is approximately 1/4 (6.4mm) above the workpiece. The angle of the torch crosses with the workpiece is known as the working angle. In general, the torch needs to be divided into two workpieces of the angle. The angle of the torch to its movement is known as the torch angle.
The torch can be pulled or pressed according to many factors including personal preferences. Torch can be moved either straight (stringer beads) or small overlapping arc (weaving pattern). Stringer is suitable for very thin materials that cannot steal too much heat.For thicker materials that require more heat, weaving is recommended. Advanced German cooling system, integrated overheating protection, and high performance cooling, you can expect better performance. We are a traditional company that integrates production, research, development and sales and has been deeply involved in welding for nearly a decade. Domestic and international foundation and professional certification. The current output is more stable and will last longer.
Upgraded version of igbt inverter. The welder uses IGBT technology at the tip to achieve 85% efficiency and 0.7 power ratio. Miniature welding equipment reduces the loss of copper and iron, is very energy saving, energy efficiency is noticeable, and the welding efficiency is greatly improved. Full Copper Welded Torch Interface. Supports use of spool gun.
The spool gun can weld aluminum. In order to meet the needs of more demands, we have added a spool gun interface. Customer feedback, our machine has excellent aluminum welding performance Spool Gun not included. Waterproof switch can protect your safety better. In cold weather, heating the gas regulator to maintain good working performance.