MIG WELDER GAS flux core WELDERS 220V GASLESS ARC STICK 3 IN 1 WEIDING MACHINE

Updated MIG150 220V goes with 1kg flux cored wire most perfectly to do the Steel welding without gas. 30A breaker suggested for 220V? Using gas with 1kg solid welding wires.

030(0.8 mm)to weld over. 030(0.8mm)Thickness workpiece. MIG/Stick, Gas/Gasless Welding all are available, MMA welding(3.2mm Rod) 7018 1/8? Very well, also 6013 and 7018 3/32?

Multi Use:welding stainless steel, mild Steel, other metal material. MIG/MMA/ARC 3 in 1 WELDING MACHINE? Input power voltage: AC 220±15%?

Rated input power capacity: KVA 4.8? Input current : 19A for mig, 23A for MMA? Output current range :30-150 A? MIG/Stick, Gas/Gasless Welding all are available, MMA welding(3.2mm Rod) 7018 1/8' very well, also 6013 and 7018 3/32. MIG/MMA/ARC 3 in 1 WELDING MACHINE.

Input power voltage: AC 220±15%. Rated input power capacity: KVA 4.8. Input current : 19A for mig, 23A for MMA. Output current range :30-150 A. Use a metal brush or grinder and clean down to bare metal before striking an arc. A fillet weld, shown here, is one of the most common types of welds. In the flat position, keep the gun angled at 45 degrees from each piece. Whether you weld vertical up or down will depend on the application and the thickness of the material you are welding.

You'll want to direct more heat into the bottom piece of metal when welding a lap joint. A 60 to 70 degree angle is usually best. 1 X Power source Mig welder RBM1500 220V. 1 X 2m cable +Earth clamp. 1 X 2m cable+ electrode holder.

1 X 2m MB15 Build in Mig welding torch. 1 X Flux cored wire 1kg without gas weld. 1 X 2m Welding gas hose.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "mirthweld" and is located in this country: US. This item can be shipped worldwide.

• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• Feed: Semi-Automatic Feed
• Item Type: MIG Welder
• Welding Process: Flux Core
• Model: MIG-150
• Input power voltage: AC220±15%V
• Rated input power capacity: 4.9KVA
• Input current: 17A
• Features: Gasless, Line Voltage Compensation, Thermal Overload Protection, With Gas
• Rated output current: 140A
• Rated output voltage: 26V
• Welded Material: Steel
• MPN: REBOOT-1003
• Duty-cycle: 70%
• Output current range: 30-140A
• Output voltage range: 15-20V
• Insulation class: F
• Protection class: IP21S
• Efficien: 85%
• Wire feeder: Inside
• Post flow time: 10S
• Brand: REBOOT
• Power factor: 0.93cosφ
• Welding thickness: ≥0.8mm
• Non-Domestic Product: Yes
• Applicable Regions: Suit For US , CA and Other Countries
• Voltage: 220 V
• UPC: 723258888199

---